KilnView

Run Real Time or Simulation Modes

 

 

 

Mode Menu: Simulation & Real Time Monitoring of Controls

The Mode menu allows a user to run the KilnView software in Real Time or Simulation mode. 

Simulation Mode: The simulation mode is only used in demo versions of the software or customer testing and training.  All data is auto generated by the system. 

Real Time Mode: The software always starts in real time mode for system safety with the software monitoring the configured input controls; i.e. FDC-2010-K5C, Series 300 Controls, etc. 

This Mode [choice of Simulation & Real Time] can be locked out in the configure users section of the program.

Return to top

Registering and Obtaining Unlock Code to run in Real Time

The KilnView software package must be registered to operate properly on a PC.  After installation, when the software is first started, the following screen will be displayed:

The User ID displays a code specific to the PC that the software is being installed on.  Call Future Design with the User ID code and we will immediately email an unlock code (or give it over the phone) to register the software.  Once the software is registered, the “register” dialog will no longer appear during software startup.

If you choose not to register the software, KilnView will run in simulation mode only (will not communicate with kiln or single loop controllers) until the software is registered.

Return to top

Return to: Main KilnView Page

Additional Kiln Information Links below:

Registering KilnView Software & Obtaining Unlock Code: KilnView Software must be registered and an Unlock Code obtained to communicate with FDC-2010-K5C Kiln Control(s) and/or Series 300 Single Loop Controls.

 

KilnView Kiln Detail View.htm: Main Kiln Data View, Schedule Entry/Edit/Run/Stop View, Schedule Trend View, Export Schedules, Core/Monitor Probe View, Setup - Alarm Setpoints, Control Tuning/Vent Setpoint and IO Monitor

 

KilnView Kiln Views.htm: Digital Values View, System Alarm Log, Alarm Log Viewer, Control Trends, Bargraphs, Historical Data Viewer [view data log files], Historical Trend Plot [plot data log files] and Audit Trail Viewer.

 

KilnView Data Logging and Historical Data Views.htm: Configure, Start, Stop Data Logging, View Historical Data Log Files.

 

KilnView Setup: Configure FDC-2010-K5C & 300 Series DIN Control for KilnView, Data Logging, 300 Series PID Loop Tuning and 300 Series Alarm Setpoints.

 

KilnView Series 300 Single Loop Controls.htm: Series 300 Single Loop Control description, links, Views, etc.

 

KilnView Security Overview.htm: Logon, Log Off, Security Configuration, Operator Messages, Audit Trail, CFR21 Security Overview and sample screens & descriptions.

 

KilnView Alarm File Viewer.htm: View, Acknowledge, Silence, Print, Export, etc.

 

KilnView - Run Real Time or Simulation.htm: Run KilnView Real Time [default] or for Training in Simulation.

 

KilnView Project Based Software.htm: Menu System to Open, Close and Save KilnView Configuration as a Project.

 

KilnView Help Screens.htm: Screen Shot of Help Screens

Return to Top

Future Design Controls 888.751.5444 csr@futuredesigncontrols.com