Orion PID Values: create, save, edit & download
Orion Manual Rev1.7.5 06-04-2006.pdf [1.1MB] Back to Main Orion Screen
The Orion runtime menu system provides a familiar, easy to use interface while reducing screen “clutter” by eliminating extra buttons required for navigation. Each series of interface screens will have their own series of menus specifically focused on the tasks for the specific screen.
Shown below at the "top" level menu when Orion runtime first loads.
The Setup Menu provides access to system and controller setup options including PID tuning files. Under Setup and then Edit
Tuning values for PB, reset and rate can be adjusted from the Orion interface. Tuning files can be opened, saved and downloaded to any control attached to the Orion link. Press the tuning fields to adjust the desired tuning parameter.
Auto-Tune: Press the “AT” button to enable auto tune on any 300 series single setpoint controller attached to the Orion link.
Tuning files can be opened, saved or downloaded directly from the “Edit” menu.
Product Brochure & Manual
Orion Manual Rev1.7.5 06-04-2006.pdf [1.1MB]
Orion DataView PC Software Download
Orion DataView Installer 1.0.zip [9.9MB]
Configuration & Setup Screens.htm [Configuration of Orion System]
System Setup.htm: Faceplates, SP limits, delays, touch calibr, etc.
Data Views.htm: Single & Dual Loop, Bargraph, Alarm Monitor, Pushbutton Status, Trend & Overall Views
Data Logging & View Historical Data.htm
PID Values.htm: create, save, edit & download
Recipes: Single Setpoint, PID & Alarm Recipes.htm: create, save, edit & download
Recipes: Ramp/Soak Profiles [Setpoint Recipes].htm: create, save, edit, download & run.htm
Digital Alarm Monitor “First-In” & Push Button Controls.htm
System Security & Audit Trail.htm
Future Design Controls 888.751.5444 csr@futuredesigncontrols.com