PR Paperless Recorder
Page 10 of 38
 

Data Logging Overview

EnVision provides both individual Device and one System data logging file.

Each Device supports its own individual data logger that can be configured and operated independently of the system data logger as well as other devices in the system.  EnVision provides the user with up to 129 concurrently running data files, the ability to log data according to individual Device use (max 128 devices) and also maintain a complete System log for uninterrupted data regardless of Device use.

Whether an individual Device or System data file, each file has user defined:
   
     - File name auto appended by time & date
  
     - Batch and Lot text may be inserted into each data file
     
     - Data log interval from 1 to 3600 seconds (60-minutes)
    
     - Operator Message(s) may be inserted into the file and as appropriate included in the data file trend plot.
     
     - Digital Signatures: System signature automatically assigned at end of a log file and with security enabled operator signatures
       manually entered. Compliance with CFR21 Part 11 adn AMS2750D requirements.
   
     - Data file storage directories configurable for each data file (129 maximum concurrently running data files)


Page Navigation - Jump to the specific page in the EnVision Tour
 

1. EnVision Navigation
2. Device Thumbnails Overview
3. Digital Values
4. System Alarms
5. EnVision Device Alarms
6. PC based Alarm Relay Output
7. General and Service Device Notes
8. Real-Time Trends
9. Single Loop Tuning
10. Data Logging Overview
11. System Data Logging
12. Device Data Logging / Historical Data File
13. Logging Overview Monitor
14. Historical Data File Viewing
15. Searching Historical Data Files
16. Historical Data File Trend Plot
17. CFR21 Part 11 and NADCAP AMS2750E: Historical Data files (Data Log) and Digital Signatures
18. Orion-M iSeries Detail View

   

19. Orion-Mi / nCompass CM Detail View Tab
20. Orion-Mi / nCompass CM Detail View: Auto Tune and Auto/Manual Tabs

21. Orion-Mi / nCompass CM Data Logging Tab
22 Orion-Mi / nCompass CM Schedules Tab (Ramp/Soak Profiles)
23. Orion-Mi / nCompass CM Profile/Schedules: Run, Stop & Hold Profile Schedules

24. Orion-Mi / nCompass CM Schedule Editor Overview
25. Orion-Mi / nCompass CM Schedule Editor: Guaranteed Soak, Loops Active and Auto Start
26. Orion-Mi / nCompass CM Schedule Editor: Stage "Wait For"

27. Orion-Mi / nCompass CM Schedule Editor: Schedule Notes
28. Orion-Mi / nCompass CM - Setup Tab
29. Orion-Mi / nCompass CM Detail View - Setup/IO Monitor
30. Orion-Mi / nCompass CM Detail View - Setup/Schedule Options

 
 
 
Future Design Controls   888.751.5444   csr@futuredesigncontrols.com